Operation and maintenance procedures of the hottes

2022-09-23
  • Detail

Operation and maintenance procedures of CNC milling machine

operation and maintenance procedures of CNC milling machine:

1. The operator must be familiar with the operating instructions of the machine tool and the general performance and structure of the machine tool, and it is strictly prohibited to use it beyond its performance. 2. Before starting the machine, check whether all parts of the machine tool are complete and normal and whether the safety protection devices of the machine tool are secure according to the provisions of the equipment point inspection card. 3. Refuel according to the lubrication chart, check whether the oil level, oil quantity, oil quality and oil circuit are normal, keep the lubrication system clean, and the oil tank and oil hole shall not be opened. 4. The operator must operate the CNC milling machine in strict accordance with the operating procedures. Other personnel shall not start the machine without the consent of the operator as long as it is fair. 5. Press each key with appropriate force, and do not beat the keyboard, keys and display screen with force. 6. High energy density lithium batteries and super capacitors based on graphene can be developed. Other items are not allowed to be placed on the worktable. When placing the dividing head, vice or heavy fixture, it is necessary to take it with care to avoid damaging the worktable. 7. In case of machine tool failure or abnormal phenomenon, stop the machine immediately for inspection and troubleshooting.> Imported pump 8. When the operator leaves the machine tool, changes the speed, changes the tool, measures the size, and adjusts the workpiece, he should stop. 9. After the work is completed, all parts of the machine tool should be kept in the original state. 3. The sampling of rolled sections or forgings should consider whether the surface has decarburization, folding and other defects, and cut off the power supply. 10. Take good care of the accessories of the machine tool and keep the machine tool clean. Does it give you a new understanding of the concrete pressure testing machine? I hope the above brief introduction can help you. 11. Do a good job in cleaning the machine tool, keep it clean, carefully implement the shift handover procedures, and fill in the shift handover records

Copyright © 2011 JIN SHI